KitchenAid Oven / Range Error Codes

Complete Troubleshooting & Repair Guide

Control System Errors
F1E0
Electronic Control Failure
  • Reset power by switching breaker OFF for 5 minutes.
  • Inspect control board connections.
  • Check for burnt or damaged components on PCB.
  • Replace main control board if issue persists.
F6E0
Communication Error
  • Check wiring harness between control modules.
  • Inspect connectors for looseness or corrosion.
  • Perform full power reset.
  • Replace control board if communication fails.
Temperature & Sensor Errors
F2E0
Over-Temperature Condition
  • Turn off oven immediately and allow cooling.
  • Check temperature sensor for faults.
  • Inspect relay stuck in ON position.
  • Replace control board or sensor if needed.
F3E0
Oven Sensor Open
  • Inspect sensor wiring connection.
  • Test sensor resistance with multimeter.
  • Check for broken or disconnected probe.
  • Replace temperature sensor if open circuit confirmed.
F3E1
Oven Sensor Shorted
  • Check sensor wiring for short circuits.
  • Inspect moisture damage near sensor.
  • Test resistance values.
  • Replace sensor if readings are abnormal.
Door & Lock System Errors
F5E1
Door Lock Failure
  • Check door latch alignment.
  • Inspect lock motor wiring.
  • Ensure door closes properly.
  • Replace lock assembly if faulty.
F9E0
Latch Motor Fault
  • Inspect latch motor for physical damage.
  • Check wiring connections to motor.
  • Test motor operation with power cycle.
  • Replace latch motor if not functioning.
Important: If errors persist after troubleshooting, disconnect power immediately and contact a certified KitchenAid technician.